Queen Size Bed Dimensions: Mattress, Frame, Room and Bedding
Share
A standard US queen mattress is 60 inches wide and 80 inches long. That’s 5 feet by 6 feet 8 inches, or about 152 × 203 cm. Most queen mattresses are somewhere between 8 and 14 inches deep, and a bed frame adds a few more inches to the width and length.
Those three numbers (width, length and depth) decide almost everything else: whether the bed fits your room, which sheets stay on, and how far a duvet hangs over the sides. Here is each one in turn, starting with the quick reference.
Queen Bed Dimensions at a Glance
| Measurement | Inches | Feet | Centimeters |
|---|---|---|---|
| Width | 60 in | 5 ft | 152.4 cm |
| Length | 80 in | 6 ft 8 in | 203.2 cm |
| Sleeping surface | 4,800 sq in | about 33.3 sq ft | about 3.1 m² |
| Typical mattress depth | 8–14 in | — | 20–36 cm |
Queen bedding is widely available in the US, so you’ll usually have plenty to choose from. Still, mattresses are made to small tolerances, so measure yours before you buy anything that has to fit it closely.
How a Queen Compares With Other Bed Sizes
| Size | Mattress (inches) | Compared with a queen |
|---|---|---|
| Twin | 38 × 75 | 22 in narrower, 5 in shorter |
| Twin XL | 38 × 80 | 22 in narrower, same length |
| Full (Double) | 54 × 75 | 6 in narrower, 5 in shorter |
| Queen | 60 × 80 | — |
| King | 76 × 80 | 16 in wider, same length |
| California King | 72 × 84 | 12 in wider, 4 in longer |
For two sleepers, a queen gives each person 30 inches of width. That’s 3 inches more than a full and 8 inches less than a king. If you’re deciding between the two smaller sizes, our full vs queen guide goes through the trade-offs, including what happens to your bedding.
Queen Bed Frame and Headboard Dimensions
The mattress is 60 × 80 inches, but the bed you walk around is bigger. Frames, side rails and headboards usually add a few inches to each dimension. Many queen frames land somewhere around 62 to 66 inches wide and 82 to 86 inches long, while chunky upholstered or sleigh designs can run larger.
There’s no standard frame size, so take the outside measurements from the specific frame’s listing. Those are the numbers to use for room planning, not the mattress size.
Height matters too. A tall frame plus a thick mattress raises the top of the bed, and that changes how far your bedding drops toward the floor. We’ll come back to that in the bedding section.
What Size Room Does a Queen Bed Need?
Room advice varies between sources, so it helps to do the math yourself. Start with the frame’s outside width, then add the walking space you want on each side. The table uses 24 and 30 inches of clearance as examples, not standards.
| Plan | Calculation | Wall width needed |
|---|---|---|
| Tight | 60 in mattress + 24 in each side | 108 in (9 ft) |
| Comfortable | 60 in mattress + 30 in each side | 120 in (10 ft) |
| With two nightstands | 60 in + two 20-in nightstands + 24 in walkway each side | 148 in (about 12 ft 4 in) |
Swap in your frame’s real width and your nightstands’ real width; the totals above use the mattress alone. Do the same for length: frame length plus the space you want at the foot of the bed. Then add any nightstands, dresser or door swing on those walls. If the totals are longer than your walls, you’ll have to give up some access somewhere.
Non-Standard Queen Sizes
A few less common mattresses also carry the queen name. Check which one you have before ordering bedding, because standard queen sheets won’t fit all of them.
- Olympic Queen: about 66 × 80 inches, 6 inches wider than standard.
- California Queen: about 60 × 84 inches, 4 inches longer.
- Short (RV) Queen: about 60 × 75 inches, common in campers.
- Split Queen: two 30 × 80-inch mattresses side by side, often used with adjustable bases.
What Size Bedding Fits a Queen Bed?
This is the part most dimension guides skip, and it’s where a queen bed either looks tidy or keeps coming untucked. Each layer has its own measurement to check.
Fitted sheet: match width, length and depth
A queen fitted sheet should match the 60 × 80-inch surface and the depth of your mattress. Standard queen fitted sheets are commonly made for mattresses up to about 14 or 15 inches deep. Deeper mattresses, or a mattress with a topper, usually need a deep-pocket sheet. Measure the depth with the topper and protector in place, then compare it with the sheet’s stated pocket depth, not just its size name.
Flat sheet: wide enough to tuck
A flat sheet has no elastic, so it only needs enough fabric to cover the top and tuck in. To check, subtract the mattress width from the sheet width and divide by two. That gives the fabric available on each side, before the mattress depth uses some of it up. A 96-inch-wide flat sheet, for example, leaves 18 inches per side on a queen. On a 12-inch-deep mattress, that’s 6 inches left to tuck.
Duvet cover or comforter: decide how much drop you want
Queen top layers are often sold as “Full/Queen,” and their sizes vary a lot between brands. Ours is a good example of the math. The Full/Queen cover in our 4pc Washed Cotton Duvet Cover Set measures 80 × 90 inches. On a 60-inch queen, that’s about 10 inches of extra width per side, which reaches roughly to the bottom edge of a 10-inch mattress. A 90- or 96-inch-wide cover from another brand would hang 15 to 18 inches per side instead.
For a longer drop, look at wider covers or comforters, and match any duvet insert to its cover in both width and length. We compared five brands’ queen duvet covers in our queen bedding sets guide, and the queen comforter size guide shows how to work out the drop for a particular comforter.
Pillows and pillowcases
Two queen pillows (about 20 × 30 inches each) span 60 inches, exactly the width of a queen mattress. Two standard pillows (about 20 × 26 inches) leave a few inches on each side. Pillow sizes vary by maker, so check both the pillow and the case. Our pillow size guide has the details.
How to Measure Your Queen Bed
- Width: pull back the bedding and measure straight across the top of the mattress, edge to edge.
- Length: measure from the head to the foot along the center.
- Depth: measure from the bottom seam to the top, including any topper you keep on the bed.
- Frame: measure the outside of the frame, headboard included, for room planning.
Write the numbers down before you shop. Our bed sheet size chart shows how to compare them with sheet listings.
Common Questions
How big is a queen bed in feet?
A standard queen mattress is 5 feet wide and 6 feet 8 inches long (60 × 80 inches).
What is a queen bed in centimeters?
About 152 × 203 cm. In some European and Asian markets, “queen” can mean a different size, such as 160 × 200 cm, so check the inch measurements when buying US bedding.
Is a queen bed big enough for two people?
For most couples, yes. Each person gets 30 inches of width. Couples who want more space, or share the bed with kids or pets, often move up to a king.
Will king bedding fit a queen bed?
A king flat sheet, duvet cover or comforter will fit and hang lower on each side. A king fitted sheet is 16 inches too wide for a queen and won’t stay smooth, so buy fitted sheets in your exact size.