Twin Bed Dimensions: Twin vs Twin XL, Room Size and Bedding
Share
A standard US twin mattress is 38 inches wide and 75 inches long, or about 3 feet 2 inches by 6 feet 3 inches (roughly 97 × 191 cm). A twin XL is the same width but 5 inches longer, at 38 × 80 inches. That single length difference is the reason twin and twin XL fitted sheets aren’t interchangeable.
Below are the measurements in inches, feet and centimeters, how twins compare with other sizes, how much room they need, and which bedding actually fits each one.
Twin and Twin XL Dimensions at a Glance
| Twin | Twin XL | |
|---|---|---|
| Inches | 38 × 75 in | 38 × 80 in |
| Feet | 3 ft 2 in × 6 ft 3 in | 3 ft 2 in × 6 ft 8 in |
| Centimeters | about 97 × 191 cm | about 97 × 203 cm |
| Sleeping surface | 2,850 sq in (about 19.8 sq ft) | 3,040 sq in (about 21.1 sq ft) |
| Usually suits | Kids, bunk beds, guest rooms, small rooms | Teens, taller single sleepers, many college dorms |
These are standard US sizes. Mattresses vary slightly and come in many depths, so measure yours before buying anything that has to fit snugly, especially fitted sheets.
Twin vs Twin XL: Which One Do You Have?
From above, they look identical. The only way to tell is to measure the length. About 75 inches is a twin; about 80 inches is a twin XL. If you’re buying for a college dorm, check the school’s housing information, since many dorms use twin XL mattresses and twin fitted sheets will come up short on them.
Here is a fact that helps when rooms change: two twin XL mattresses side by side make 76 × 80 inches, the same footprint as a king. Two regular twins make 76 × 75 inches, which is 5 inches shorter than a king, so king fitted sheets won’t sit properly on them.
Length is also the reason to choose a twin XL. At 75 inches, a regular twin is 6 feet 3 inches long before the pillow takes its share. A teenager who is still growing will notice the extra 5 inches long before they notice the price difference.
How a Twin Compares With Other Bed Sizes
| Size | Mattress (inches) | Compared with a twin |
|---|---|---|
| Twin | 38 × 75 | — |
| Twin XL | 38 × 80 | Same width, 5 in longer |
| Full (Double) | 54 × 75 | 16 in wider, same length |
| Queen | 60 × 80 | 22 in wider, 5 in longer |
| King | 76 × 80 | Twice as wide, 5 in longer |
A twin is a one-person bed. Its 38 inches of width is the same as each sleeper’s half of a king, so it’s roomy for one and tight for two. If you’re weighing a twin against a full for a growing child or a guest room, the full adds 16 inches of width but no length. Our full vs queen guide covers the next step up.
Twin Bed Frame and Room Size
Frames add a few inches to the mattress size, and there’s no standard frame dimension. Daybeds, captain’s beds with drawers and bunk beds can be noticeably larger, so take the outside measurements from the specific frame before planning the room.
For floor space, do the math with the walking room you want. The table uses 24 and 30 inches of clearance as examples, not standards:
| Layout | Calculation | Wall width needed |
|---|---|---|
| Against a wall, open on one side | 38 in + 30 in | 68 in (5 ft 8 in) |
| Open on both sides | 38 in + 24 in each side | 86 in (7 ft 2 in) |
| Two twins with a gap between | 38 + 38 + 24 in between + 24 in each outer side | 148 in (about 12 ft 4 in) |
Use your frame’s real width in place of 38 inches. Pushing a twin against the wall is the classic small-room move, and it works well as long as nobody needs to make that side of the bed every morning.
What Size Bedding Fits a Twin or Twin XL?
Size guides for mattresses rarely mention bedding, but this is where twin and twin XL beds go wrong most often. Check each piece separately.
Fitted sheet: twin and twin XL are different
A fitted sheet should match the mattress width, length and depth. A twin fitted sheet is cut for 75 inches of length and won’t reach the corners of an 80-inch twin XL. A twin XL fitted sheet on a regular twin will be 5 inches too long and tends to wrinkle. Measure the mattress depth with any topper in place too, since dorm mattresses often get a topper that a standard pocket can’t cover. Our bed sheet size chart shows how to measure and compare.
Flat sheet: check the width for tucking
A flat sheet needs enough width to cover the top and tuck in. Subtract 38 from the sheet width and divide by two to see the fabric on each side. A 66-inch-wide flat sheet, for example, leaves 14 inches per side, which tucks comfortably under a 9-inch mattress. Flat sheets are usually the one piece that can work on both twin and twin XL, if the length allows.
Duvet cover or comforter: one size usually covers both
Twin top layers are often sold as “Twin/Twin XL.” Our 4pc Washed Cotton Duvet Cover Set, for example, lists its Twin/Twin XL cover at 60 × 80 inches. On a 38-inch mattress, that leaves about 11 inches of extra width on each side. The length matches a twin XL mattress, so on an XL the cover will reach the foot without much overhang once a pillow is in place. If you like a long drop at the end of the bed, compare the listed length before you buy.
Pillows
One standard pillow (about 20 × 26 inches) is the usual fit for a twin, leaving room on either side. A queen-size pillow (about 20 × 30 inches) also fits the 38-inch width. Our pillow size guide explains how pillow and pillowcase sizes vary.
How to Measure a Twin Bed
- Width: measure straight across the top of the mattress, edge to edge. Expect about 38 inches.
- Length: measure head to foot. About 75 inches is a twin; about 80 is a twin XL.
- Depth: measure from the bottom seam to the top, including a topper if you use one.
- Frame: measure the outside of the frame for room planning, especially for daybeds and bunk beds.
Common Questions
How big is a twin bed in feet?
A standard twin mattress is about 3 feet 2 inches wide and 6 feet 3 inches long (38 × 75 inches). A twin XL is 3 feet 2 inches by 6 feet 8 inches.
Is a twin the same as a single?
In the US, yes: “single” usually means a twin. In other countries, a single can be a different size, so check the inch measurements when buying US bedding for it.
Do twin sheets fit a twin XL?
A twin fitted sheet is 5 inches too short for a twin XL. Flat sheets and Twin/Twin XL duvet covers usually work on both.
Can two adults sleep on a twin?
Not comfortably. At 38 inches wide, a twin is designed for one person. Two twin XLs pushed together give the footprint of a king instead.