King Size Bed Dimensions: King vs California King, Room and Bedding
Share
A standard US king mattress is 76 inches wide and 80 inches long. That’s 6 feet 4 inches by 6 feet 8 inches, or about 193 × 203 cm. A California king is a different shape: 72 × 84 inches, which is 4 inches narrower and 4 inches longer. Sheets for one don’t fit the other.
Here are the measurements in every unit you’re likely to need, how king compares with California king and queen, how much room a king takes, and the bedding numbers most size guides leave out.
King Bed Dimensions at a Glance
| King (Eastern King) | California King | |
|---|---|---|
| Inches | 76 × 80 in | 72 × 84 in |
| Feet | 6 ft 4 in × 6 ft 8 in | 6 ft × 7 ft |
| Centimeters | about 193 × 203 cm | about 183 × 213 cm |
| Sleeping surface | 6,080 sq in (about 42.2 sq ft) | 6,048 sq in (about 42.0 sq ft) |
| Width per person, two sleepers | 38 in | 36 in |
One detail surprises people: a California king is not the bigger bed. It has slightly less sleeping surface than a standard king. It’s longer and narrower, which suits tall sleepers and longer, narrower rooms.
King vs California King: Which One Do You Have?
Measure the width. About 76 inches is a standard king; about 72 inches is a California king. The length confirms it: 80 inches for a king, 84 for a California king.
This matters most for fitted sheets. A king fitted sheet on a California king is 4 inches too wide and 4 inches too short, so the corners won’t sit right. A California king sheet on a standard king has the opposite problem. Top layers such as duvet covers and comforters are often sold as “King/Cal King,” because a few inches either way doesn’t change how they drape.
There’s also the split king: two twin XL mattresses (38 × 80 inches each) side by side, often used with adjustable bases so each side can move separately. Together they measure 76 × 80 inches, the same as a king, but each half needs its own twin XL fitted sheet. Our twin bed dimensions guide covers twin XL sizing.
How a King Compares With a Queen
A king is 16 inches wider than a 60 × 80-inch queen and exactly the same length. For two sleepers, that’s 38 inches each instead of 30, the same width as a twin bed per person. In practice, it means one person can turn over without the other feeling much of it.
The trade-off is floor space and the cost of every layer you put on it. If you’re choosing between the two, our queen size bed dimensions guide lays out the queen’s numbers in the same format.
King Bed Frame and Room Size
Frames add several inches to the mattress size, and there’s no standard frame dimension. Upholstered frames and wide headboards can add a lot, so take the outside measurements from the specific frame’s listing before planning the room.
For wall space, add the walking room you want on each side to the frame’s outside width. The table uses 24 and 30 inches of clearance as examples, not standards, and starts from the mattress width alone.
| Plan | Calculation | Wall width needed |
|---|---|---|
| Tight | 76 in mattress + 24 in each side | 124 in (10 ft 4 in) |
| Comfortable | 76 in mattress + 30 in each side | 136 in (11 ft 4 in) |
| With two nightstands | 76 in + two 20-in nightstands + 24 in walkway each side | 164 in (13 ft 8 in) |
Replace 76 with your frame’s real width. Then check the length the same way, adding space at the foot of the bed. And measure the doorways and stairs on the way in. A king mattress is large to move, and a frame with a solid headboard can be the piece that doesn’t make the turn.
What Size Bedding Fits a King Bed?
King bedding has the most room for mismatch, simply because the numbers are bigger. Check each layer on its own.
Fitted sheet: exact size and depth
Match the fitted sheet to 76 × 80 inches (or 72 × 84 for a California king) and to your mattress depth, measured with any topper or protector in place. Thick king mattresses with toppers often need a deep-pocket sheet. Check the stated pocket depth, not just the word “king.”
Flat sheet: wide enough to tuck
Subtract 76 from the flat sheet’s width and divide by two to get the fabric on each side. A 96-inch-wide flat sheet leaves 10 inches per side. On a 14-inch mattress, that stops about 4 inches short of the bottom edge, with nothing left to tuck. A 108-inch-wide sheet leaves 16 inches per side, enough to tuck under a 12-inch mattress. Our bed sheet size chart walks through this check.
Duvet cover or comforter: the width decides the look
King covers vary more than any other size, so the width is worth working out before you buy. Our 4pc Washed Cotton Duvet Cover Set lists its King/Oversized Queen cover at 86 × 94 inches. On a 76-inch king, that’s only about 5 inches of extra width per side: it covers the top and turns over the edge, but much of the mattress side stays visible. It gives a neater, more tailored look, or a generous drop on an oversized queen.
If you want the cover to hang well down the sides of a king, look for one around 104 to 110 inches wide, which gives 14 to 17 inches per side. Whatever you choose, match the duvet insert to the cover in both width and length. The king bedding sets guide covers what’s typically included in a king set.
Pillows
Two king pillows (about 20 × 36 inches each) span 72 inches, which fits a 76-inch king with a little room to spare. Three standard pillows (about 20 × 26 inches) come to about 78 inches, slightly wider than the mattress, so they’ll squeeze together a bit. For arrangements, see our pillow size guide.
How to Measure a King Bed
- Width: measure straight across the top of the mattress. About 76 inches is a king; about 72 is a California king.
- Length: measure head to foot. About 80 inches for a king, 84 for a California king.
- Depth: measure from the bottom seam to the top, with your topper on.
- Frame: measure the outside of the frame and headboard for room planning, plus the doorways it has to pass through.
Common Questions
How big is a king bed in feet?
A standard king mattress is 6 feet 4 inches wide and 6 feet 8 inches long (76 × 80 inches). A California king is 6 feet by 7 feet (72 × 84 inches).
Is a California king bigger than a king?
No. It’s 4 inches longer but 4 inches narrower, and its total surface is slightly smaller. Choose it for length, not extra space.
Are two twin XL beds the same as a king?
Side by side, two twin XLs measure 76 × 80 inches, the same as a king. Two regular twins come to 76 × 75 inches, which is 5 inches shorter.
Will king bedding fit a queen?
A king duvet cover, comforter or flat sheet will fit a queen and hang lower on the sides. A king fitted sheet is 16 inches too wide for a queen, so buy fitted sheets in your exact size.